Our Plastic Garden Gate looks great in any outdoor space. is a great way to Tekplas’ Small Slatted is made from the high quality PVC and will fit varying gaps between 600 – 1200m. If your gap is bigger then we can offer a slatted panel to match the gate. Or we can make them wider, but they may need to be reinforced with steel depending on the size. Please contact us for prices
These are designed to replace your existing timber gates and are supplied complete with hinges, latch and post, these gates can easily be fitted into an existing opening to enhance any home or garden.
- High-Quality PVC Product
- Strong Rigid Construction
- Easy Clean Wipeable Surface
- Maintenance Free
We manufacture all of the profiles ourselves so we can offer bespoke sizes, please contact us.
Our coloured gates, have a grain to the surface of the plastic, making them look similar to wood.
The side posts are 75mm x 75mm x 900mm in height, pre-fitted with a snap-in slot cover and need to be secured to an existing wall or post. Our Gate height on a flat top style is 880mm leaving you room to lift the gate off the ground for the gate to open and close correctly. Our arch style gates, the arch starts at 880mm and raises anything from 100-150mm high depending on the width of the gate ordered.
Small Garden Gate comes with the following:
- Hinges and screws for fixing
- Door latch and screws for fixing
- Posts complete with end caps
If you cannot fix both posts top, middle and bottom at either side of the gap you will require an aluminium post (please note the posts will be powder coated to match the colour of the gates)
The aluminium posts will be cut longer to allow them to be cemented into the ground, this will provide a much stronger fix.
Please note the aluminium posts are 100mm x 100mm and the PVC posts are 75mm x 75mm.
Total Gap Field Explained
We require the total gap your gate is required to fill e.g. brick to brick gap. It is best to measure both the top gap and bottom gap. If the measurement is different top to bottom please input the smallest dimension into the total gap field. We can then minus the posts supplied and clearance for the gate to open and close correctly.
We recommend any gap over 1meter wide, the gate needs to be fitted with a diagonal brace.
We have changed the type of hinge that we now supply with this gate. It is stronger and more durable.
We have 3 different types fo hardware finish for the gate.
- Black Powder coat (£0.00)
- Zinc Plated (£0.00)
- Stainless Steel (£50.00 extra)