Tekplas Plastic 2 Ranch Rail Fencing is a simple fencing kit that fences an area whilst still allowing good visibility and will enhance any garden area or farm land area. Also known as Equestrian fencing.
The Ranch 2 Rail Fencing is completely maintenance free which means there is no need to worry about varnishing or rotten wooden panels as the entire system is made from PVC. The easy wipe surface can be wiped clean with ordinary household disinfectants or washed with a pressure washer or hose pipe
We can supply the posts longer to cement into the ground (best method) or we offer the post 60cm high post with a 700mm ground spike which you knock into the ground about 300mm if possible and our post slides over the top. Or we can supply metposts, which you knock into the ground flush with the ground level and our posts slots into the metpost and then you tight the adjusters on the metpost to clamp our post securely. We also offer a solid floor fixings for solid ground or patio’s. Please see fixings page.
You will need to purchase a Finishing Post 600 to complete the fencing run. As each section you buy only comes with one post. So when planning your fencing, please remember to order the finishing post, again if you have an opening for a path you will need two finishing posts.
- Post Height 600mm.
- Width 1225mm (Centre to Centre of Post)
- Rail 34mm x 100mm x 1150mm
Ranch 2 Rail Fencing Kit are complete with the following:
1 x 600mm PVC Post
1 x Cap For Post
2 x Spacer 600mm Long
2 x Slot Cover 600mm Long
2 x Horizontal Rails 1150mm in length